15kV 630A High Quality Silicone Rubber Lnsulated Cap

35kV 630A IEC Type Separable Connectors And Kits

15kV/20kV 630A IEC Type Rear Connector Cable Accessories

15kV/20kV IEC Rear Connector with Surge Arrester Cable Accessories

JDJ2-35 Outdoor Oil Filled Voltage Transformer

JDJ2-35 Outdoor Oil Filled Voltage Transformer Specifications: Rated voltage: 33kV

JDZ10 Voltage Transformer VT PT

JDZ10 Voltage Transformer VT PT. Installation Site: Indoor. Rated Frequency: 50/60Hz. Burden Power Factor: cosφ=0.8（lagging). Technical Standard: IEC 60044-2:2003

LZZBJ9 Current Transformer CT

Rated Insulation Level: 12/42/75kV. Rated Frequency: 50/60Hz. Installation Site: Indoor Technical Standard: IEC 60044-1:2003

High voltage fuses

High voltage fuse Current limited fuse Rockwill HV Fuse-links have parallel connecte

Medium voltage fuse combination contactor

Fuse links are automatic, selectively acting medium voltage switching devices which will protect your transformers, cables, condensors and installations safely from the thermal and dynamic effects of short circuits within the voltage range of 3-36 kV.

FZ(R)N25-12 Load Break Switch

FZN25-12 Indoor AC HV vacuum Load break switch and FZRN25-12D Indoor AC HV vacuum load break switch with assembly fuse is the controlling and protecting equipment of three-phase 50Hz, 12kv distribution system.

FZ(R)N21A-12 vacuum LBS

FZN21A-12 and this type of indoor AC high voltage load switch- fuse combination units appliances for three-phase AC 10kV, 50Hz power system.

Whole solution for VLBS and Its Switchgear

Whole solution for LBS compartment. SM6 similar switchgear. Uniswitch similar switchgear. 6.3kV up to 36kV.

FN12 Indoor Air Pressure LBS

FN12 indoor air pressure LBS. It is a three phase H.V. switch equipment of 12kV, 50Hz for breaking or closing load current., no-load transformer cable charging current and closing short-circuit current.

FN18-12 Air pressure load break switch

FN18-12 Air pressure load break switch. It is used in three-phase power distribution of AC 50Hz rated voltage 12kv and rated current 630A Esp for power ring network in city network construction.

FN18-24 Air Pressure Load Break Switch

FN18-24 Load break switch, disconnector used for the 24kV 50Hz power systems.This switch is installed indoor, can match with the manual and motor operating machanism.This switch can match with the fuse and the earthing switch.